YG155B electronic yarn twist device simple to use Notes
Information Sources: | Release date:
2016-02-24
| Pageviews:
Key words:
My company's YG155B electronic instrument used to determine the
yarn twist variety of cotton, wool, silk, linen, chemical fiber yarn twist. Instrument man-machine dialogue, and the final result, the liquid crystal display, make operation simple. Instrument zero adjustment convenient, and has a data storage function; control of single action to ensure accuracy. 10cm twist value is automatically displayed without calculation. In operation, the user can always check the test data. Further data can display output, the printer can also be printed out in Chinese.
When customers buy our YG155B electronic yarn twist device, there are several points to be especially mentioned. First, when the instrument is unpacking and installation, note the following:
1. When unpacking the boxes, you must first open the wooden lid, then remove the four sides of the box board, and then carefully remove the instrument, creel.
2. When transporting the instrument, allowing only the instrument base by force, it does not allow other parts of the force.
3. The instrument must be placed at the level of a sturdy work bench with a soft cloth to wipe clean the surface of the instrument, the instrument is placed on the left and then a good creel.
4. Carefully check whether all parts of the instrument is damaged due to transportation or unpacking process produces, deformation, loose phenomenon.
5. Instruments should have a good grounding power, the same power line as there is no frequent start electrical equipment or power outlet at frequent plugging other electrical equipment around the instrument may not have a strong magnetic field.
6. Please connect the printer
Then when the instrument is in use should note the following points:
1, power on the host, to see whether the zero position indicator light, if light is showing zero. If not zero adjustment is required. The method of adjusting the light-sensitive housing locating rack position so that the indicator light is zero. In simple terms it is adjusted to zero.
2, the instrument must be placed horizontally, it does not allow shaking phenomenon.
3. Turn on the printer to see if the printer can work normally. If there is no problem, you can begin testing.
Last but not least and before any use of the instrument Note that the same considerations, Wan accidentally if the machine fails, the timely and our technical and sales staff to contact, good to help you quickly find and solve problems.