YG026A type electronic fabric strength tester simple precautions
Information Sources: | Release date:
2016-02-24
| Pageviews:
Key words:
I produced YG026A
type electronic fabric strength tester, the instrument is not with a computer, some not quite know how to care and maintenance of the instrument, here we come to explain to you next.
Product transportation and installation should pay attention to matters relating to the instrument with a computer almost as well as pay attention to four points:
1. The machine at the packing factory, heel in the box during transport is strictly prohibited and dumping rain.
2. After unpacking, the instrument is only allowed to focus on moving around the frame and the bottom of the instrument, it is forbidden to tie the rope wear on the upper and lower holder and other parts handling.
3. The machine installation site should meet the following requirements:
a. indoor surface smooth, clean air, no corrosion, no obvious power disturbances.
b. the host, the printer, there should be a good grounding power.
4. Plug the printer, the host power supply, and other on-line, connected. And install paper.
Then in terms of product maintenance and maintenance should pay attention to the instrument with a computer than to a little more.
1. Keep clean the printer and host.
2. The operator should always add oil to the chain and on the holder of the carriage column, the instrument up, down transmission section was in good working condition.
3. Each year according to national measurement standards JJG475 "electronic universal testing machine" test procedures require a level of machine verification strong indication to ensure the accuracy of the test instrument.
4. Instrument found is not normal, check the troubleshooting. It should be turned off by the familiar with the instrument's full-time service personnel.
5. When every day is not working, turn off all power.
In addition, as the boot sequence instrument without a computer, so there is no particular need to pay attention and inhibit operation performed on the computer. But there is little to illustrate the last point, if the machine Wan accidentally fails timely with our technical and sales staff to contact, good to help you quickly find and solve problems.