Before we will continually upload precautions YG026A and YG026B two types of fabric tensile machine products, many of our customers through this information on their own equipment were inspected and maintained a good response. But through their feedback, we hope to use precautions YG026T series geotextile universal testing machine products as well as other instructions are also able to upload up, so that they can see, and allow them to buy their own equipment can also be a series of checks and maintenance, we have responded positively and meet their requirements, in the period of time to put information content precautions instrumentation aspects sort, the following do some simple introduction.
      Product transportation and installation should pay attention to matters of fact, almost all the previous instruments:
      1. This instrument in the packing factory, heel in the box during transport and dumping of rain is strictly prohibited.
      2. After unpacking, the instrument is only allowed to focus on moving around the frame and the bottom of the instrument, is forbidden to tie the rope wear on the upper and lower holder and other parts handling.
      3. The installation site of the machine should meet the following requirements:
      a. indoor surface smooth, clean air, no corrosion, no obvious power disturbances.
      b. the host, the printer, the computer should have a good grounding power.
      4. The testing machine is placed on a solid platform or cement bench, alignment with a spirit level, adjusting the four adjustment screws so that the machine in a horizontal position.
      5. Place the printer power, computer power, the host power supply, and other on-line, connected. And install paper.
      Next product maintenance and upkeep should be noted that in the previous two on the instrument is not the same thing.
      1. Instrument according to national measurement standards JJG475--86 "electronic universal testing machine test procedures" in the machine requires a strong level of inspection to ensure the accuracy of the test instrument.
      2. Inspection and peacetime operations and transportation, pay attention to the protection of the sensor.
      3. Non-professional and technical personnel can not easily removable instrument parts.
      There are also two considerations like to focus mention:
      1. The order of the boot to open the computer display power - the computer - the printer - Host power off the opposite.
      2. Prohibition of the user computer's hard drive contents abuse.

      Last but not least, and before that as the two instruments to illustrate, if the machine Wan accidentally fails timely with our technical and sales staff to contact, good to help you quickly find and solve problems.