If you purchased a product of your favorite long, so I do not say, I believe you will be very caring and attentive custody. As our company's equipment, too, if customers buy our Changzhou Shuanggu Dunda Electromechanical Technology Co., Ltd.flagship product YG023C-Ⅲ automatic yarn strength tester, then there are many caveats, here to serve you introduced.
      First, when the product transport and installation Note:
      1. The machine at the packing factory, placed across the box during transport and dumping of rain is strictly prohibited.
      2. After unpacking, the instrument is only allowed to focus on moving around the frame and the bottom of the instrument, it is forbidden to tie the rope wear on the lower gripper and other components. Instruments foot four wheels, allowing only move on a smooth flat surface.
      3. The machine installation site should meet the following requirements:
      a. indoor surface smooth, clean air, no corrosion, no obvious power disturbances.
      b. the host, printer, computer power supply should have a good grounding.
      4. The printer power supply, computer power supply, the mains, and other on-line, connected. And install paper.
      Then the product should pay attention to maintenance and repair:
      1. keep clean the printer and host.
      2. The operator should regularly and add oil to the chain in the holder carriage column, the instrument up, down transmission section was in good working condition.
      3. The instrument found is not normal, it should be turned off by the familiar with the instrument's full-time maintenance personnel check troubleshooting.
      4. When the day does not work, turn off all power.

      Finally, if the machine Wan accidentally fails timely with our technical and sales staff to contact, good to help you quickly find and solve problems.